Are you away from home for vacation? Do you forget to water your plants? MarCas Tech offers a plant / soil irrigation system programmed.
Touchless door handle mechanism that can be used in every door just replacing the standard handle. Very useful for people with disabilities.
This device works in Long Range Mode (LRM) using a special encoding technique for more information see the Actuator or TRX Unit technical do
Measures tVOCs (Total Volatile Organic Compounds) + eCO2, dust density even for small particles >0.5μm, temperature and relative humidity.
The fundamental purpose of this work is to extract book properties from the title pages of antique books and classify them accordingly.
HuGo is a humanoid robot, created by 3D printing technique, controlled by FPGA boards using sensors, actuated by servo motors.
The aim of this project is to process LiDAR and camera data on Zybo Z7-20 to detect objects with usage of data fusion.
Hamparsum Note Convertor system which has historical importance is taken with Pcam5c and converted into current note system.
TCP controlled camera keeps tracked object in center of video.
An autonomous car able to drive along a lane and react to roadsigns, obstacles and smart RFID markers, powered by OpenCV and Embedded Linux.
Preamble is a signal used in network communications to synchronize transmission timing between two or more systems.
A RISC-V core with a Custom Hardware Module (CHM) for hardware acceleration.
Infrared image processing extending the Pcam 5C demo.
The purpose of the project is to design and manufacture a wireless automatic guitar tuner.
Wireless communication in between two FPGAs. Compressed image will be sent to another FPGA board. So you can send your images very quickly.
We design a flexible, remote-controlled test system for polar codes in FPGA.
With this project ,we aim to create a way to play physical chess with someone even if that person is on the other side of the world.
Radio that works with analog signal is implemented digitally on FPGA via VHDL.
How to make an easy CNC-plotter using Arduino.
Cutsie Whun is a tough and fast, RC-controlled, 2-wheeled balancing fun machine.
This is a project that aims to build an RGB LED P6 panel based LED Clock using RPi Zero W and Electrodragon interface board.
Cutsie Whun is MEGA BREAD series project #6. A tough, fast, and RC controlled 2 wheeled balancing fun machine. A lot of hard work pays off.
We found an app that will check the weather and give you the best travel method to go to school or work.
This project, known as Biotronics, was conceptualized to create synthetic species that are alive, aware, and conscious based on I.M.