Creating A simple Project Using Cmod S7 FPGA WIth Vivado
It dispenses coasters remotely to signal to a person they should use a coaster because people never use them even though they should.
This is a Robot that can play football.
Just a mouse.
An Alexa activated alarm clock that when it goes off, LEDs with strobe until the alarm is turned off.
Senses the vibration of the toilet flushing, and closes the toilet seat
Fan of football but like to play air hockey? Air football is the perfect combination for you!
Using a IR proximity sensor and microcontroller to find the local values of 'g' and will plot a real time damping curve.
How to Control 16 LEDs with 74HC595 Shift Register | Arduino 74hc595 16 led with 18 effects
Have you ever tried to create a real spinning Jet yourself! checkout the detailed making steps in this Hackster post.
Creating a simple oscilloscope with the Basys3 board
Using the ADP3450, this project measures amount of delay between asserting FPGA IO on base of NPN 2N3094 and LED illuminating on collector.
A controller made with c++ and python
A smart beehive that can keep the beekeeper in the know about everything related to the beehive and to the bees.
Creation of an embedded system that allows monitoring a hive through a sigfox module connected to an IoT platform.
This project is a tribute to Thomas Edison and it's an internet radio
This spectrum analyser with 10 channels uses an analog back-end to analyse the incoming signal from line-in or microphone. Acrylic display.
A connected hive is the beekeeper's best ally for monitoring bees, making bee monitoring easier and saving the beekeeper time.
This project demonstrates how to take a custom RTL module and add an AXI4-Lite interface wrapper to it for use in the Vivado block design.
As a fun start to 2022, I pulled out the HP vintage bubble displays I bought on eBay with a simple Verilog controller module on the Arty Z7.
How to make a simple laser beam tracking system
Bluetooth transmitters are different and highly integrated modules. Here is the info, to use and select proper module for different purpose.
This tutorial aims at making a Smart Door Bell using TuyaOS Link SDK on Raspberry Pi.
RGB and addressable led, can be supplied with 3.3volts. Using these big panels we can make clock and other display devices.