Solid State Precharge CoolMOS solution for automotive HV battery.
This is a PIR sensor-based automatic lamp switch.
Example of diy smart socket. This can be controlled by ESP8266 Home application. With this smart socket you can on/off any device in home.
This project is a GPS tracking system with LCD display using an Arduino Uno and a Digilent PmodGPS.
Pet feeder is for people who live with pet(s) to help them feed their pets when they are not at home.
This irrigation controller includes the innovative capability to measure flow, detect leaks, bad valves and bad wiring in the system.
Frustrated with the toilet seat being left up or dirty by the person before you? Moms/wives/girlfriends, this automated solution is for you!
Smart plug with remote monitoring (temperature, current, voltage, energy), control (automatic, manual, voice, proximity) and notification.
A scrolling text display, using 294 LEDs to simulate a stock exchange ticker.
Build a weather station with Arduino & ASP.NET Core.
This is a project that aims to build an RGB LED P6 panel based LED Clock using RPi Zero W and Electrodragon interface board.
Control an FPGA from the Linux OS. Dynamically reconfigure the FPGA from Linux user-space. Control custom hardware on the FPGA from Linux.
This project creates an FPGA-controlled hexapod robot which is capable of walking and navigating around its environment using sonar and IMU.
It can be hard to measure environments that can affect your hearing over time. This wearable monitors environmental sound levels.
Set up an RGB LED to phase through the colors of the rainbow, or use twist knobs to make a custom color.
Concept with prototype for home automation that can be expanded to professional grade and production ready.
Integrate Siemens SIMATIC and LOGO and some modbus, bacnet HVAC controllers to cloud, prepare data for visualization and standard storage.
Let's learn everything about SRAM memories writing a controller in Verilog.
RGB LED backlight with audio signal visualization for room/desk backlightning...
This is a demonstration on how a service such as a group of weather stations can influence the decisions of devices via the IOTA network.
In this project, we're going to use the DHT11 humidity and temperature sensor to calculate the average temperature and humidity every hour.
Light up three different LEDs using pulse width modulation corresponding to different ranges of analog input voltages.
A standalone portable and ruggedized electronics lab bench!
Cutsie Whun is MEGA BREAD series project #6. A tough, fast, and RC controlled 2 wheeled balancing fun machine. A lot of hard work pays off.