Home Security at the touch of your fingers! Get notifications when your house door is opened.

This project uses an LCD screen and DHT22 to display temperature and humidity data, simultaneously collected from two different locations.

Remote Controlling a laser through the use of multiple argons.

When the reset button is pressed, the board will take an image, store it to the microSD card and it will then go back to deep sleep.

A robot for children which helps to play and reduce addiction of smartphone.

We will show you, how to start work with MIPI, using Vivado "Open Example Design" feature

Because LED are fun - but addressable rocks. :)

FPGA based binary clock, which uses GPS for the time reference.

This project fixed my problems with hot and cold rooms and logs details about how it was done, to compare to my ecobee4 thermostat details.

Let's test this shield.

An Arduino-based chemostat controlling cell growth in a MFC (Microbial Fuel Cell). [Currently this page is a WIP, busy being updated. ]

A colorful butterfly containing 14 WS2812B RGB LEDs driven using a Arduino Digispark.

Build a wearable impact force monitor to help keep your very important brain (and body) safe!

It feels awesome when you have the power to control things remotely.

The Convertible LED Matrix Clock is a new take on designing LED displays. Its design allows it to be converted into two different modes.

Intrusion detection by the help of the PIR sensor. Whenever someone tries to come in signal will found in the form of a text message.

Want a way to control a light and water for your indoor crops using IoT? This project might interest you.

In Maker Faire Seoul 2019, skiiiD giveaway Arduino Nano and Neopixel! Instruction for how to use NeoPixel and Arduino with skiiiD.

How to get the PYNQ and Matrix Voice to work with each other.

Leveraging FPGA capabilities to design and to implement a Frequency Hopping Spread Spectrum (FHSS) System.

Use your hand to control the height of a pixel, and then navigate through a map full of obstacles to avoid. Get to the end to win!

The MyPi is a well documented kit that uses a Raspberry Pi 3 running RetroPie to create a large screen handheld retro game system.

This is a very simple way to control a 3-phase AC installation in a delta configuration.

An automatic temperature monitoring system with an attached alert system. For any change in given condition a buzzer will sound an alert.