RGB LEDs triangular/hexagonal pixels matrix.
Interactive snake enclosure that is temperature and humidity controlled and uses lat-long to mimic natural light cycles, with an online cam.
The objective is to find an easy way to implement RS485 on an Arduino Uno, then to adapt it to an ESP8266.
A solar-powered IoT device for monitoring sound level, air quality, humidity, and temperature.
Build your own line following robot (line follower) step by step easily by following this tutorial
RGB LED backlight with audio signal visualization for room/desk backlightning...
In this project, we have made an automatic water tap using Arduino and IR sensor to solve the problem of wastage of water in our daily life.
Training board for essential logic gates.
When the reset button is pressed, the board will take an image, store it to the microSD card and it will then go back to deep sleep.
In this article, we are going to make an Arduino weather clock which will tell us the time, date and temperature.
MoveThisWay is an autonomous robot that transports heavy payloads on programmable paths with obstacle detection capability.
How to connect A6 GSM GPRS module with Arduino and also work with “AT” commands.
I do a lot of work with image processing and need to test cameras / imagers. I am going to create a scalable test platform.
Our objective is to design, build and implement in-the-field technology in an ecological way that generates environmental awareness.
This micocontrollers laboratory is designed to speed up projects, and make easy and clean connections.
The system is designed to detect unauthorized entry (face masks), that are essential to protect ourselves and to avoid spreading COVID-19.
DigiSpark ATtiny85 I2C connected to a tiny OLED (128x32 pixels) can show easily readable, huge fonts (16x32 pixels WxH)!
Simple data logger that stores electrical data (voltage, current, power, energy, etc.) in an SD card, with timestamp for later analysis.
This getting started guide teaches you how to program Python on Digilent Arty Z7-20, the Xilinx Zynq Z7020 SoC platform.
A machine that consists of a face mask sanitiser (using UV LEDs), an automatic hand sanitising machine and an ARM MCU that checks vitals.
Managing address WS2812B strip with ESP8266 via the web interface.
This is the 2nd tutorial on my ESP32 learning journey. Here, an OLED shows time and captured data by DHT sensor (temperature & humidity).
2 in 1 vending machine, send mobile top-up, recharge prepaid phone and a wifi hotspot to provide internet access
Let's teach Neural Network how to do a job for us.