This guide will show you how to make a physical interface for LabVIEW.
This project uses a tablet running Data Dashboard and a Raspberry Pi to wireless control a WF32 fan set up.
In my project, I used LabVIEW to interface with 3 Pmod ENC's connected to a WF32 to control a LabVIEW project I made called LabForms.
Use VHDL to implement a simple digital Combination Locker State Machine on the Nexys4 FPGA Board. Designed in Xilinx Vivado.
This irrigation controller includes the innovative capability to measure flow, detect leaks, bad valves and bad wiring in the system.
Pinpoint both internal and external trouble spots with the Analog Discovery 2's spectrum analyzer to improve the performance of your device
Use the Analog Discovery 2 network analyzer and Waveforms 2015 to get a better idea of how circuits responds to various types of inputs.
Bundle multiple tools together in one small package, including an adjustable power supply, with the Analog Discovery 2 and Waveforms 2015.
A data logger is similar to an oscilloscope, but is used to register data over relatively long periods of time.
Use the Analog Discover 2 as an affordable, compact and lightweight oscilloscope.
Sense or generate change-of-state instances with the Analog Discovery 2's 16 channel I/O.
Calibrate the Analog Discovery 2 so you can ensure you are making the most accurate measurements possible.
How to use the logic analyzer with a SPI demo on the Basys 3 as an example.
How to connect an Analog Discovery 2 USB Oscilloscope to LabVIEW, using LabForms 2.0.
How to make a homemade electrocardiograph (ECG).
A standalone portable and ruggedized electronics lab bench!
Usefull project when you wake up at night for washroom the PIR Sensor Senses your Motion and turns the tube light on.
Speed limit within 30-10 meter distance of the object
A class D audio amplifier based around a TPA3255 board with features that include preamps as well as balanced and unbalanced inputs.
This project, known as Biotronics, was conceptualized to create synthetic species that are alive, aware, and conscious based on I.M.
To build an efficient and low-cost method for waste management with the help of AI/ML that can be implemented on RPi.
Just a simple, fun Candy Dispenser using Arduino, a 3D Printer, and tape.
How to integrate DesignStart Arm Cortex-M1 and M3 processors with the Xilinx Zynq.
Jenny 5 is a fully open-source robot. It has a mobile platform, a flexible leg, two arms with 7 degrees of freedom each and a head.