Using the Zybo Z7, I demonstrate how to access MMIO devices in Genode and howto switch bitstreams at run time.
An automatic pet feeder using WizFi360-EVB-Pico controlled via WiFi. We can wirelessly control the pet feeder with an app.
Using the Zybo Z7, I demonstrate how to access GPIO in Genode and how to load a custom bitstream at boot time.
This is a basic tutorial about booting the Genode OS Framework on Zynq-7000-based hardware.
Measuring Capacitance of capacitor using 555 Timer IC, 7490 Decade Counter, and ammeter
Mini mill program, 3 axis with milling head and lathe, switchable from 3 axis manual mpg to full cnc - multi-controller (future)
Support encoder and decoder to create the words or symbols what you need
How to implement a image processing solution on the AC701 using a MIPI Camera and FMC Interface Card.
This project demonstrates how to drive an N20 micro-gear motor with encoder using a Digilent HB3 motor controller PMOD with the Kria KR260.
In this blog we will see how to use an automated Lighting System using IR sensors which is also gesture controlled.
Strip what you don't want & take what you need! This colour-detecting project allows you to quickly use OpenCV with a camera in seconds.
A protesting object for a possible solution for the social issue of tailgating.
Most families and buildings are used to reserve water by water pump and water tank in Taiwan, and focus on the function and maintenance.
In this guide we will be looking at working with the cloud version of thingsboard platform
Automation for railway signal
Control df mini player with esp8266
If you want to learn how to produce your own small electronics gadget then this Hackster post will give you some tips
In this project we are going to implement an IIR filter in an FPGA from scratch using bilinear transform and the prewarping technique.
AXI-Lite registers bank. Can be monitored/changed via TCL commands. Also monitored through a seven-segment display + onboard switches.
Here is a project that involves the electric side of your bike or car! we are building a 12V Bulb flashing circuit fully documented.
A robot that avoid the edge near him.
In this project we are going to connect and configure a PCIe WWAN modem to a Zynq MPSOC using Petalinux and the Genesys ZU 5EV board.
A project by a team of students from the Hebei University of Technology
3D printed and run by a single stepper motor, this unique clock's hands float in a hollow frame.