Jenny 5 is a fully open-source robot. It has a mobile platform, a flexible leg, two arms with 7 degrees of freedom each and a head.
This circuit divides the voltage to three ranges: 12V DC, 9V DC and 5V DC.
In this tutorial, we are going to look at how we can build a RISC-V, specifically the SiFive Freedom E310.
A simple device that makes controlling humidity and saving energy a snap. Operates as easily as a thermostat.
Usefull project when you wake up at night for washroom the PIR Sensor Senses your Motion and turns the tube light on.
NeoPixels are great fun to work with. LED cubes are also very visually interesting. Let's look at creating a PYNQ-controlled one!
A solar-powered IoT device for monitoring sound level, air quality, humidity, and temperature.
Till the completion of Cute Drawing Buddy V1, SCARA Robot - Arduino I plan for a another drawing bot, main aim is to cover a large space.
A smart city is an urban area that uses different types of electronic data collection sensors to supply information used to manage assets.
How to build a wind turbine MPPT regulator within direct injection or battery configuration, 24V or 48V, 30A max. New release 1.1 Manual
Measures tVOCs (Total Volatile Organic Compounds) + eCO2, dust density even for small particles >0.5μm, temperature and relative humidity.
The ability to see across multiple elements of the EM spectrum, e.g. visible IR, provides significant benefits. Let's look how we can do it.
Control home appliances from the comfort of your phone with just a relay and a Bluetooth module!
Are you tired of giving any surplus of your homemade electricity to your electric grid provider? Here is the solution to stop the waste!
OpenCM is a micro-manipulation framework based on μCube.
Learn how to lift-off a drone with your mind and a hacked controller using a MindWave sensor, Arduino MKR1000 and Processing.
A digital finger sensor to protect against theft.
An automated, smart, self-contained growing system that cultivates plants from seed to maturity!
Minimalist cars race with a strip of smart LEDs and two switches.
Diversity Adaptive Obstacle Avoiding Robot
The project is intended to detect the location of fault in underground cable lines from the base station to exact location in kilometers.
An Arduino-based robot drummer. It works with a transistor noise-generator and an arrangement of servos hitting a can and a pair of piezos.
Leveraging HLS functions to create a image processing solution which implements edge detection (Sobel) in programmable logic.
A smart iot outlet controlled by Google assistant, learn how to connect blynk with ifttt