In the hydroponic farming industry, a method of growing is referred to as ebb and flow. Our project automates this task.
I made an RC car in this class.
Application notes for Pmod JSTK and Arduino Uno. In this app, the Pmod JSTK will be used to control LEDs with button pushes.
Home Automation: control various home appliances with the help of voice recognition.
Application notes for Pmod DHB1 and Arduino Uno. In this app, motor control is carried out using the serial monitor.
Application notes for Pmod JSTK2 and Arduino Uno. The X & Y values are displayed in the serial monitor, lighting LEDs using buttons.
The goal of this project was to create a space where an individual can maximize their focus capabilities, even if just for a short time.
This tutorial will teach you how to use Digilent's Pmod interfaces in LabVIEW.
Application notes for Pmod STEP and Arduino Uno. In this app, the motor makes a complete turn in one direction and then returns to origin.
Easy to use Platform to learn VHDL. Running on a ZYBO over the web.
This project consists of making a logical analyzer, which can help us analyze digital hardware and software analysis.
Cutsie Whun is a tough and fast, RC-controlled, 2-wheeled balancing fun machine.
Hamparsum Note Convertor system which has historical importance is taken with Pcam5c and converted into current note system.
Characterizing button switching behavior is an important first step for developing effective debounce algorithms in your systems.
Application notes for Pmod DA1 and Arduino Uno. Outputs A1 & B1 to make square wave signals.
Learn how to use the many many different data types LabVIEW including booleans, numerics, strings, arrays, and more.
Preamble is a signal used in network communications to synchronize transmission timing between two or more systems.
How much faster can an algorithm run in FPGA fabric than in a processor? It depends on the algorithm, but often, much, much, faster.
TI-RTOS, operating system for the Texas Instrumets microprocessors. Application of the LRM (Long Range Mode) on the RC-CC1310-868 device.
A LabVIEW application's users interface is built using controls for user input and indicators to display data, graphics, and information.
Portable LED color stick reacts to your shaking motion. With extra fan and alarm.
Application notes for Pmod SSR and Arduino Uno. In this app, a load is controlled from the serial monitor.
Application notes for Pmod SF2 and Arduino Uno. In this app, data is stored at the specified address and then replayed.
Make Rock Paper Scissors game fairer.