Pmod HB3

Pmod HB3
See Projects

The Pmod HB3 is a 2A H-Bridge module. This module includes a separate pin header in addition to the standard 6-pin header to receive any external motor feedback signals. The H-Bridge can be driven through GPIO signals.

Features:

  • 2A H-bridge circuit
  • Drive a DC motor with operation voltage up to 12V
  • Screw terminal blocks for connection to the motor
  • Separate header for external motor feedback
  • Small PCB size for flexible designs 1.2 in × 0.8 in (3.0 cm × 2.0 cm)
  • 6-pin Pmod connector with GPIO interface
  • Follows Digilent Pmod Interface Specification Type 5
Lego Land Rover Defender Robot with Kria KR260

This project shows how I used the Kria KR260 & Edge Impulse to transform the Land Rover Defender Lego Technic kit into an autonomous robot.

Lego Land Rover Defender Robot with Kria KR260

Whitney Knitter
1.9K
FPGA Based Motor Control

FPGA are ideal for precision motor control, in this project we are going to create a simple motor control application which we can build on.

FPGA Based Motor Control

Adam Taylor
3.2K
Arm DesignStart FPGA Cortex-M3-Based Robot

Using the Arm DesignStart FPGA Cortex-M3 to control a simple wheeled robot. Also known as getting started with DesignStart FPGA & Cortex-M3.

Arm DesignStart FPGA Cortex-M3-Based Robot

Adam Taylor
9.0K
Mini But Mighty, the MiniZed and Vitis for Motor Control

How to use the MiniZed with the Vitis embedded flow for motor control applications.

Mini But Mighty, the MiniZed and Vitis for Motor Control

Adam Taylor
4.8K
Mini But Mighty, MiniZed Alarm Clock

Adding a display to the MiniZed Motor Control live build equals an alarm clock that will be sure to start your day off on a good note.

Mini But Mighty, MiniZed Alarm Clock

Dave Spinden
943

Actual PWM duty cycle on 7-segment LED display, driven by hardware (PL) and controlled by software (PS).

7-Segment LED Display Hardware and VHDL Module for MiniZed

Adam Szychulec
6.9K
Motor Control with the MiniZed

How to control motors using PWM, the MiniZed and a touchscreen controller.

Motor Control with the MiniZed

Adam Taylor
5.2K
MiniZed and Vitis for Motor Control with added HC-SR04

Extension of 'Mini But Mighty, the MiniZed and Vitis for Motor Control' project by Adam Taylor with HC-SR04 to control the speed.

MiniZed and Vitis for Motor Control with added HC-SR04

Jordy Achten
1.7K
Using the Pmod HB3 with Arduino Uno

Application notes for Pmod HB3 and Arduino Uno. In this app, a motor will be controlled and the status displayed on the serial monitor.

Using the Pmod HB3 with Arduino Uno

Alex Wong and Martha Migliacio
1.6K
Speech controlled robot with Tensil and Arty A7 - Part 2

Learn how to build a speech controlled robot with Tensil, Digilent Arty A7 FPGA board and Pololu Romi chassis.

Speech controlled robot with Tensil and Arty A7 - Part 2

Peter Hizalev
1.1K
Mini But Mighty motor control via builtin accelerometer

Builds on the project Mini But Mightyu, the MiniZed and Vitis for Motor Control using the built in accelerometer to control the speed.

Mini But Mighty motor control via builtin accelerometer

Tim Michals
807
MiniZed and Bob the Blue Element14 Robot Dude

Based on Adam Taylor's - Mini But Mighty, the MiniZed and Vitis for motor control, Bob the Blue Robot Dude dances to MiniZed control.

MiniZed and Bob the Blue Element14 Robot Dude

R. Scott Coppersmith
782
Speech controlled robot with Tensil and Arty A7 - Part 1

Learn how to build a speech controlled robot with Tensil and Digilent Arty A7 FPGA board

Speech controlled robot with Tensil and Arty A7 - Part 1

Peter Hizalev
502
Driving Motors with Encoders on the Kria KR260

This project demonstrates how to drive an N20 micro-gear motor with encoder using a Digilent HB3 motor controller PMOD with the Kria KR260.

Driving Motors with Encoders on the Kria KR260

Whitney Knitter
489

Our Partners

Help

Customer Info

Company Info

Add projectSign up / Login