Dasun Tharanga Priyasad
Published

Arduino Pmod LS1

Application notes for Pmod LS1 and Arduino Uno. The input voltage and output level of the comparator module is displayed in serial monitor.

EasyProtip2 hours272
Arduino Pmod LS1

Things used in this project

Hardware components

Pmod DPOT
Digilent Pmod DPOT
×1
Pmod LS1
Digilent Pmod LS1
×1
Arduino UNO & Genuino UNO
Arduino UNO & Genuino UNO
×1
Custom PCB from JLCPCB
×1

Story

Read more

Code

Code

Arduino
/************************************************************************
*
* Test of Pmod LS1
*
*************************************************************************
* Description: Pmod_LS1
* The output voltage of the digital potentiometer module changes from 0 to 5 V
* And the comparator module returns a high level if the voltage is
* Greater than threshold.
* The input voltage and output level of the comparator module is displayed
* In the serial monitor.
*
*
* Material
* 1. Arduino Uno
* 2. Pmod DPOT
* 3. Pmod LS1
*
************************************************************************/

#define CS 10 // Assignment of the CS pin
#define comparateur 2 // Assignment of the comparator pin
#include <SPI.h> // call library

int i;
int val=0;
float tension;

void setup()
{
 Serial.begin(9600); // initialization of serial communication
 SPI.begin(); // initialization of SPI communication
 SPI.setDataMode(SPI_MODE0); // configuration of SPI communication in mode 0
 SPI.setClockDivider(SPI_CLOCK_DIV16); // configuration of clock at 1MHz
 pinMode(CS, OUTPUT);
 pinMode(comparateur, INPUT);
}

void loop()
{
 for (i=0;i<256;i=i+1)
   {
   digitalWrite(CS, LOW); // activation of CS line
   delayMicroseconds(15);
   SPI.transfer(i); // Send variable i (i=0->Vout=0V i=255->Vout=Vcc)
   val=analogRead(A0); // conversion AN
   tension = map(val, 0, 1023, 0, 5000); // Voltage varies from 0 to 5000 for a variation of val from 0 to 255
   tension=tension/1000;
   Serial.print("i=");
   Serial.print(i);
   Serial.print('\t'); // tabulation
   Serial.print("val=");
   Serial.print(val);
   Serial.print('\t'); // tabulation
   Serial.print("Tension=");
   Serial.print(tension);
   Serial.println("V");
   digitalWrite(CS, HIGH); // deactivation of CS line
   if (digitalRead(comparateur)==HIGH)
   {
    Serial.println("La sortie du comparateur est au niveau haut");
   }
   else
   {
    Serial.println("La sortie du comparateur est au niveau bas");
   }
   delay(200);
   }
}

Credits

Dasun Tharanga Priyasad

Dasun Tharanga Priyasad

1 project • 0 followers

Comments

Add projectSign up / Login