Already have an account? Sign in
Check the RF sockets with Blynk app!
You want to attach the DigiSpark ATtiny85 to a tiny OLED (128x32 pixels) and make it write in easily readable huge fonts (16x32 pixels WxH)?
A low profile controller for NeoPixel - with easy programming. It's a cool project.
This library allows an Arduino to easily display numbers and characters on a 4 digit 7-segment display without a separate 7-segment display.
Responds on sound or can be set on automatic, all by IR. Or switch. WS2812B VU Bar on UNO or Nano. See video and description for info.
We use the app of mobile phone to transmit data through Bluetooth to control the the car whiche can move forward, back off, left and right
The tutorial takes you into the intricacies of the BLE protocol and how to integrate the BLEPeripheral library into the RAK iTracker module.
A Cool Hand which can mimic the Gestures of a Human Hand.
This project is meant to protect you from any thief who may try to hack the password to your system.
Use VHDL to implement a simple digital Combination Locker State Machine on the Nexys4 FPGA Board. Designed in Xilinx Vivado.
A Cool Hand which can mimic the gestures of a Human hand.
Application notes for Pmod CLS and Arduino Uno. In this app, the message sent from the serial monitor will be displayed on the Pmod LCD.
Arduino based light measuring device.
A heart rate monitoring system that tracks your heart beat in "BMP" but I made a little difference by adding some LabView Visualisations.
Send voice controls to your LabVIEW application using the Amazon Echo.
A simple IR receiver setup controlling 2 LED by a relay board
We have created a car controlled by claps with arduino.
It also stops when it impacts with something.
How to flash MicroPython on a Sonoff Smart Switch to prepare for communication with Cloud4RPi service.
Learn how to use the Digital Discovery to debug the high-speed video HDMI, SPI, and I2C on the Arty Z7 AP SoC.
This exercise will show you how to use your OpenScope MZ to read the output of a first order RC circuit.
Smart Box to improve customer satisfaction in restaurants which allows clients to rate the service via Sigfox and ThingSpeak IoT platform
This exercise will show you how to use your Analog Discovery 2 to verify what the signal looks like from an Arduino PWM pin in LabVIEW.
This tutorial shows how to use the data collected from LoRa nodes into beautiful graphs and visualization using Node-red and Grafana.
A Generic setup for museum exhibit automation.
DFRobot 4 relay shield 2.1 and Screw shields,
Hitachi 16*2 Display shield,
on UNO or Mega.
Or connect with your social account:
New here? Create an account