Already have an account? Sign in
A system that automatically switches the lights ON/ OFF based on occupancy and send data from such a system to the cloud for analysis.
Save money on your electric bill using Alexa and some mad IoT skillz. Like a Nest for your water heater.
This is the 2nd tutorial on my ESP32 learning journey. Here, an OLED shows time and captured data by DHT sensor (temperature & humidity).
My young children were not tall enough to pull the chains on the ceiling fan, to turn on the fan & light. Alexa, turn on the 'Boys Light'.
A heart rate monitoring system that tracks your heart beat in "BMP" but I made a little difference by adding some LabView Visualisations.
Monitoring and controlling my UPS from Cayenne with SparkFun ESP8266 Thing Dev Board.
48x8 Programmable Scrolling LED Matrix using Arduino and Shift Registers.
In this article, we are going to make an Arduino weather clock which will tell us the time, date and temperature.
This irrigation controller includes the innovative capability to measure flow, detect leaks, bad valves and bad wiring in the system.
Pet feeder is for people who live with pet(s) to help them feed their pets when they are not at home.
Smart Box to improve customer satisfaction in restaurants which allows clients to rate the service via Sigfox and ThingSpeak IoT platform
Smart plug with remote monitoring (temperature, current, voltage, energy), control (automatic, manual, voice, proximity) and notification.
Send voice controls to your LabVIEW application using the Amazon Echo.
For this project, I used LabVIEW to create a Raspberry Pi controlled Sumobot.
This dog bed is able to track the sleeping habits of your dog, as well as analyzing the sleep quality of your best friend.
This project uses a tablet running Data Dashboard and a Raspberry Pi to wireless control a WF32 fan set up.
GLO is an IoT smart light, developed using ESP8266 and Cayenne IoT platform.
This project allows you to control a fan and a servo over WiFi with LabVIEW.
How to flash MicroPython on a Sonoff Smart Switch to prepare for communication with Cloud4RPi service.
No more energy loss. Easily switch ON/OFF individual appliances connected to a power strip with your smartphone or PC.
Check the RF sockets with Blynk app!
Imagine a 'foosball table' that autonomously calculates LIVE match statistics, such as goal scores, ball possession, successful passes, shot
This guide will show you how to make a physical interface for LabVIEW.
The goal of this project was to create a space where an individual can maximize their focus capabilities, even if just for a short time.
Or connect with your social account:
New here? Create an account