DIY digital tachometer using IR Sensor and Arduino(No display, output shows on serial monitor).
The system prevents you to forget the mask at home and also remind you to sanitize your hands when come come
I let the internet display messages on my University graduation cap and I did not regret it! Find out how I did it.
The goal of the project is to build a "Roomba" type quadrupedal robot that uses an IMU and Ultrasonic Sensor to detect its surroundings.
Mobile station for weather exploration with ATttiny85 and BME280 for your smartphone.
Old linear stage + Old HDD case = Modern piece of test equipment
The most basic NeoPixel interface doesn't consume precious PSOC hardware resources. based on GPIO and Core timings
How to control a light sensor in HLS using Basys 3 board.
Voltmeter using arduino amd LCD display.
Ever park in a tight spot and forget which way your tires are pointed? Well fear no more! With this particle argon configuration.
This Project Which Iam Sharing To You Is A Password Protected Lock System With Lcd Which Is Very Simple To Make So Lets Get Started
This is a thermometer intended for measuring the temperature in the room where we are staying, also known as room comfort thermometer.
Why keep it small? Giant Acrylic 14 Bands spectrum analyzer, open source Arduino
Expanding on my last project post for getting started with the TE0711, this project covers developing the application for the MicroBlaze.
See how to get the TE0711 SoM running on the TE0701 baseboard from Trenz Electronic.
A system that closes my closet door using a servo motor and an Particle Argon
Moving data from traffic generator peripheral to DDR memory of Zybo Z7-10 using register mode DMA transactions
Implement a 4-channel TDC on Cmod A7 35 using MicroBlaze and SRAM with 30ps rms and measurement rate of 60MSa/s
B-Hive is an autonomous electronic monitoring device enabling beekeepers to oversee their hives' well-being.
Simple Arduino-based 30-minute alarm clock with gentle "gong" sound.
See how to create a simple traffic generator peripheral with a slave AXI4-Lite interface and a master AXI-4 streaming interface
I wanted to create a device that could spin spools of thread when I pressed a button so I could just cut the thread and continue sewing.
Create a bed light with neopixel and an encoder to select the color and britghness
See how to get up and running with the new ADP3450 USB Oscilloscope to fulfill your bench top test equipment needs.