Already have an account? Sign in
A heart rate monitoring system that tracks your heart beat in "BMP" but I made a little difference by adding some LabView Visualisations.
A tiny telegraph that can write any text messages that look like a telegrammes. This project made of oak plywood.
In this article, we are going to make an Arduino weather clock which will tell us the time, date and temperature.
This irrigation controller includes the innovative capability to measure flow, detect leaks, bad valves and bad wiring in the system.
Pet feeder is for people who live with pet(s) to help them feed their pets when they are not at home.
48x8 Programmable Scrolling LED Matrix using Arduino and Shift Registers.
Ever care about the place you may spend one third of a day? enVMon captures noise level, air quality, UV level, temperature and humidity.
This propeller display is mechanically scanned and displays the characters in digital format. Made from scrap it can be used anywhere.
A standalone portable and ruggedized electronics lab bench!
Control an FPGA from the Linux OS. Dynamically reconfigure the FPGA from Linux user-space. Control custom hardware on the FPGA from Linux.
The HDrive is an easy to use IoT-enabled servo drive, both for the inexperienced and for professionals.
This is a project that aims to build an RGB LED P6 panel based LED Clock using RPi Zero W and Electrodragon interface board.
This project is meant to protect you from any thief who may try to hack the password to your system.
My young children were not tall enough to pull the chains on the ceiling fan, to turn on the fan & light. Alexa, turn on the 'Boys Light'.
Convert an old speaker into something cool powered by Pi Zero.
This is the 2nd tutorial on my ESP32 learning journey. Here, an OLED shows time and captured data by DHT sensor (temperature & humidity).
This tutorial describes the process of setting up a Raspberry Pi as a LabVIEW target using LINX.
Creating a LabVIEW Data Dashboard to interact with your embedded LabVIEW application from your Android or iOS tablet.
This project will show how to use your OpenScope MZ in LabVIEW.
Smart plug with remote monitoring (temperature, current, voltage, energy), control (automatic, manual, voice, proximity) and notification.
Create a Hospitality Robot that is capable of interacting with visitors at public spaces such as Malls, Rec Centers, Hospitals, Stadium etc.
Cutsie Whun is MEGA BREAD series project #6. A tough, fast, and RC controlled 2 wheeled balancing fun machine. A lot of hard work pays off.
Monitoring and controlling my UPS from Cayenne with SparkFun ESP8266 Thing Dev Board.
How to make a homemade electrocardiograph (ECG).
Or connect with your social account:
New here? Create an account