KRIA kv260 comes with 2 ARM R5 processors which can offload time critical tasks from linux with openAMP example is available in plnx BSP
This project walks through the build of an embedded Linux image for the Kria KV260 Vision AI starter kit using PetaLinux 2021.2
This project walks through how to integrate the required u-boot environment variables for the Zynqberry boards into a PetaLinux project.
This project walks through how to generate an embedded Linux image with the Yocto-based PetaLinux tools from Xilinx for the ZynqberryZero.
This project walks through how to create a Linux image with a desktop environment outputting on to the DIsplayPort of the TE0802.
This project walks through how to install an Ubuntu Linux distribution on the TE0802 MPSoC FPGA development board.
This project walks through how to create a base Linux image for the TE0802 Zynq UltraScale+ MPSoC development board.
This tutorial walks through an application that reads/writes data to DDR memory from the Linux userspace on the Zynq-based Arty Z7 FPGA.
Creating custom applications is pretty straightforward in PetaLinux, but to debug them, Vitis comes into play.
See how to generate a custom embedded Linux image for the Arty Z7 using PetaLinux 2020.2.
This tutorial will go through, step-by-step, how to bring up a simple OpenAMP application on the SnickerDoodle Black from the ground up!
A security system, with motion detection, based on a raspberry pi 3 model B and an usb webcam.
Collecting large data sets is key to applied data science. Use the techniques in this project to collect data on your BBC micro:bit.
Raspberry Pi-based video conferencing unit that a senior does not have to touch at all. Relatives can call her any time to give support.
Our Gnome is ready to follow you in your travels and keep track of all the places you visit, thanks to a GPS shield and the Nano Every.
ESP32 + HTTP server + WebSockets + Bootstrap + Husarnet + configuration and HTML files on SD card.