Already have an account? Sign in
This is a project that aims to build an RGB LED P6 panel based LED Clock using RPi Zero W and Electrodragon interface board.
How to connect an Analog Discovery 2 USB Oscilloscope to LabVIEW, using LabForms 2.0.
Build a small portable electronics lab with an Analog Discovery and an Orange Pi PC Plus
Application notes for Pmod 8LD and Arduino Uno. In this app, LEDs will light up like in a famous television series from the 2000s.
How to use the logic analyzer with a SPI demo on the Basys 3 as an example.
A two-wheel robotics platform built on the Arty development board.
Allows quick evaluation of Power Supply Plant parameters for TI Buck_VMC_F2837xS project.
This project is meant to protect you from any thief who may try to hack the password to your system.
This project will show how to use your OpenScope MZ in LabVIEW.
Cutsie Whun is MEGA BREAD series project #6. A tough, fast, and RC controlled 2 wheeled balancing fun machine. A lot of hard work pays off.
Application notes for Pmod JSTK and Arduino Uno. In this app, the Pmod JSTK will be used to control LEDs with button pushes.
It's an awesome car tracker project.
Application notes for Pmod HB3 and Arduino Uno. In this app, a motor will be controlled and the status displayed on the serial monitor.
Use VHDL to implement a simple digital Combination Locker State Machine on the Nexys4 FPGA Board. Designed in Xilinx Vivado.
Application notes for Pmod DHB1 and Arduino Uno. In this app, motor control is carried out using the serial monitor.
Application notes for Pmod ALS and Arduino Uno. In this app, the value of the amount of light is displayed on the serial monitor.
Application notes for Pmod JSTK2 and Arduino Uno. The X & Y values are displayed in the serial monitor, lighting LEDs using buttons.
Send voice controls to your LabVIEW application using the Amazon Echo.
This project uses a tablet running Data Dashboard and a Raspberry Pi to wireless control a WF32 fan set up.
A six-legged robot spider that can walk, balance and display sweet visuals on an LED array.
This tutorial describes the process of creating a startup executable from a VI and deploying it to run each time the LINX device starts.
This tutorial describes the process for blinking an LED on the BeagleBone Black or Raspberry Pi 2/3 by creating a LabVIEW application.
In my project, I used LabVIEW to interface with 3 Pmod ENC's connected to a WF32 to control a LabVIEW project I made called LabForms.
My unboxing experience of the Analog Discovery 2.
Or connect with your social account:
New here? Create an account