Martha MigliacioAlex Wong
Published © GPL3+

Using the Pmod AD2 with Arduino Uno

Application notes for Pmod AD2 and Arduino Uno. The result of the A/D conversion of channel A0 is displayed on the serial monitor and LCD.

EasyShowcase (no instructions)1 hour341
Using the Pmod AD2 with Arduino Uno

Things used in this project

Hardware components

Pmod AD2
Digilent Pmod AD2
×1
Pmod CLS
Digilent Pmod CLS
×1
Arduino UNO & Genuino UNO
Arduino UNO & Genuino UNO
×1

Software apps and online services

Arduino IDE
Arduino IDE

Story

Read more

Schematics

Pmod AD2 and Arduino Uno Fritzing file

Fritzing file displaying the connection of the Pmod AD2 to the Arduino Uno.

Pmod AD2 and Arduino Uno Fritzing Image

Fritzing image displaying the connection between the Pmod AD2 and Arduino Uno.
Pmodad2arduinouno bb lgwtmnoayw

Code

Pmod AD2 and Arduino Uno Code

Arduino
Using this code will show the result of A/D conversion of channel A0 displayed on the serial monitor and serial LCD.
/************************************************************************
*
* Test of the Pmod 
*
*************************************************************************
* Description: Pmod_AD2
* The result of A / D conversion of channel A0 is displayed on the serial monitor
* and on a serial LCD display.
*
*
* Material
* 1. Arduino Uno
* 2. Pmod AD2 (Jumper on V4 position)
* 3. Pmod CLS 
*
************************************************************************/

#include <Wire.h> // call library
#define AD7991_Adresse 0x28 // I2C adress of the Pmod AD2 module

//Déclaration d'un port série
#include <SoftwareSerial.h>
SoftwareSerial lcd(2,3); // RX, TX

int MSB;
int LSB;
int valeur;

void setup()
{
 Serial.begin(9600); // initialization of serial communication
 Wire.begin(); // initialization of I2C communication
 Init_AD7991(); // initialisation du module Pmod AD2
 lcd.begin(9600); // initialization of serial communication of display
 lcd.write("\x1b[j"); // Erase display
 lcd.write("\x1b[0h"); // cursor positioning 2nd row 1st column
}

void loop()
{
 Wire.beginTransmission(AD7991_Adresse); // Launch of the measure
 Wire.endTransmission();
 delay(10);
 Wire.requestFrom(AD7991_Adresse, 2); // Recovery of the two bytes MSB and LSB
 if(Wire.available() <=2)
 {
  MSB = Wire.read();
  LSB = Wire.read();
 }
 valeur=MSB<< 8 |LSB ;
 Serial.print("MSB="); // display in serial monitor
 Serial.println(MSB);
 Serial.print("LSB=");
 Serial.println(LSB);
 Serial.print("Valeur=");
 Serial.println(valeur);
 lcd.write("\x1b[j"); // Erase display
 lcd.print("MSB="); // Write on display
 lcd.print(MSB);
 lcd.print(" LSB="); // Write on display
 lcd.print(LSB);
 lcd.write("\x1b[1;0H"); // cursor positioning 2nd row 1st column
 lcd.print("Valeur="); // Write on display
 lcd.print(valeur);
 delay(1000);
}

// Initialisation du module Pmod AD2
void Init_AD7991(void)
{
 Wire.beginTransmission(AD7991_Adresse);
 Wire.write(0x08); // configuration of the I2C communication in HIGH SPEED Mode
 Wire.write(0x10); // configuration of Pmod AD2 (read of V0)
 Wire.endTransmission();
}

Credits

Martha Migliacio

Martha Migliacio

5 projects • 5 followers
Alex Wong

Alex Wong

5 projects • 13 followers
I work in Digilent and like creating projects
Thanks to Lextronics.

Comments

Add projectSign up / Login